BO-51 manual sealless steel strapping kit, 13-20 mm, with steel strap

Manual sealless steel strapping kit

The BO-51 kit is a manual sealless steel strapping kit that puts the tool, the strap and the cart together, so you can start strapping the day the parcel arrives. Its heart is the BO-51 manual strapping tool for steel strap 13-20 mm wide. One hand tool tensions the strap, makes a punched joint and cuts it, so no seals, no batteries and no compressed air are needed.

You choose the steel strap when you order: 16 × 0.5 mm or 19 × 0.5 mm, a coil of 25 kg. The dispenser cart holds the coil, feeds the strap without twisting and keeps the tool at hand.

What the kit contains

• Manual sealless steel strapping tool BO-51. Tensions, joins and cuts in one tool, punched joint without seals.
• Steel strap, 1 coil of 25 kg. 16 × 0.5 mm or 19 × 0.5 mm.
• Dispenser cart for steel strap. HS5, for ribbon-wound steel strap, maximum load 50 kg.

Technical data of the manual steel strapping tool BO-51

Dispenser cart

Where the manual sealless steel strapping kit is used

The kit is made for crates, bundles of profiles, pipes and lumber and other loads strapped with light steel strap, also where there is no electricity or compressed air.

FAQ

Which variant should I choose for the manual sealless steel strapping kit?

You choose the steel strap when you order: 16 × 0.5 mm or 19 × 0.5 mm, a coil of 25 kg.

Do I need seals?

No. The BO-51 joins the strap with a punched joint, so you save the cost of seals.

Can I order more strap?

Yes, strap, seals and buckles are also sold separately; write to us and we will add them to the order.

Before you order: the manual sealless steel strapping kit ships as one consignment with the cart. If you need a different strap or more coils, write to us and we will add them to the order.