Selecting the right electric pallet truck battery

The XT2 battery is a 48 V pallet truck battery for the SMITH XT2. The CLE battery is a 12 V, 120 Ah traction battery for the SMITH CLE walkie stacker with S-Ride platform, and the CLJB battery is a 12 V, 100 Ah battery for the SMITH CLJB walkie stacker.

Each battery in this category is designed for the specific SMITH machine in its title, so the size and connector fit the battery compartment and plug of that model. Using a battery that doesn’t match can result in loose connections or may not fit into the compartment at all.

When selecting a battery, always start by identifying your machine model and choose the battery made for it. This ensures you get the working time intended by the manufacturer. You’ll find the voltage and capacity of each battery in its title and in the table below, so you can compare them with the label on your current battery.

How to match a pallet jack battery to your equipment

To replace a pallet jack battery, make sure the voltage matches your machine. The capacity, shown in ampere-hours (Ah), determines how long your equipment can operate between charges.

If you use a battery with the wrong voltage, your machine might not start or the controller could be damaged. For example, a 12 V battery won’t run a 48 V machine, and using a battery with too high a voltage can cause costly faults. If you pick a battery with lower ampere-hours than your old one, your machine will run out of power sooner during a shift.

When installing the new battery, turn the machine off and remove the key before disconnecting the old battery. Make sure the new battery’s connector is fully seated—a loose connection can heat up and damage the contacts. Write the installation date on the battery so you know its age when performance starts to drop.

Overview: Batteries and charger for SMITH equipment

The table below lists the three batteries and the charger available in this category, with their main specifications and the SMITH machine each one fits. Each part name links to its product page.

To use the table, first find your machine in the second column. Then, read across to the third column for the battery or charger details made for it. For example, the SMITH XT2 uses a 48 V battery and a 2 A charger with an EU plug.

Safe charging for your walkie stacker battery

The XT2 charger is a 2 A unit with an EU plug, designed for the XT2 battery. If your outlets are a different type, you’ll need a plug adapter.

The pallet truck charger in this category is for the XT2. Always charge each battery only with its designated charger. Even if the plug fits, a charger for another battery may have a different voltage or charging method.

Charge the battery after each shift in a dry, well-ventilated area away from heat sources, and allow the charging cycle to finish before unplugging the charger. Whether you can do short top-up charges during breaks depends on your battery type, so follow the charging instructions for your machine.

Before plugging in, inspect the charger’s cable and plug for visible damage—a damaged cable can cause a short circuit or prevent the charger from working. Keep the charger clean and uncovered while charging to avoid overheating. Don’t leave your machine with an empty battery over weekends or holidays; charge it before you leave.

Spare parts for SMITH walkie stackers

These pallet truck batteries and the charger are spare parts for the three SMITH machines listed above. The machines themselves can be found in the walkie stackers category.

If you need other parts for these machines, use the Get offer button on a product card and include your machine model and the part you’re looking for. Have your machine’s model and serial number ready when ordering to ensure you receive the correct part. Both numbers are on the machine’s rating plate.

Tips for extending pallet truck battery life

A pallet truck battery will last longer if you charge it after every shift and never leave it empty.

Signs that your pallet truck battery is wearing out include shorter run times on a charge or the machine slowing down earlier in the shift. If you notice these, plan to replace the battery; the correct battery for each machine is listed above.

Stop and recharge when your machine starts to slow down instead of running the battery completely flat. Running until the machine stops shortens battery life.

Keep the battery and its terminals clean and dry to avoid connection issues. Check cables for signs of wear or damage, as a damaged cable can interrupt power. Dust and spilled liquids can build up on the battery during daily use, so regular cleaning keeps contacts in good condition and operation safe.

Cold temperatures can reduce battery run time. If possible, charge and park the machine at room temperature. Before storing a machine for an extended period, charge the battery and recharge it regularly while in storage so it never sits deeply discharged.

Turn off a machine with the key if it will not be used for several days, since the electronics can slowly drain the battery. Do not start charging a battery while it is still hot from heavy use; let it cool down first. Track how long your machine runs on a full charge—if the runtime drops significantly, the battery is reaching the end of its service life.

What to check before you order

Before you order a pallet truck battery, verify your machine’s model, the voltage and capacity of your current battery, and whether you also need a charger.

You can find the machine model on its rating plate, and the voltage and capacity on the label of your old battery.

Check your charger before buying a new battery. A faulty charger will not charge a new battery any better than the old one. For the XT2, order the 2 A charger with your battery if your old charger is missing or not working. If you are unsure which battery fits your machine, send us the model and serial number using the Get offer button before placing your order.

Pallet truck spare parts pricing

You can see the current price for each pallet truck battery and charger on the product cards above.

Over the lifetime of your machine, the battery is one of the biggest ongoing costs. Careful charging and regular maintenance will help you get the most out of it.

Replace a worn-out battery before it fails during a shift, as a sudden breakdown can halt production or cause shipping delays. If you need multiple parts, you can add them all to one request using the Add to inquiry button. This is helpful for maintenance teams servicing several machines at once and wanting to order all necessary pallet truck spare parts together. Return your old battery for recycling; do not dispose of it with regular waste.

Questions about pallet truck batteries

Which battery fits my SMITH machine?

Each pallet truck battery is designed for a specific SMITH machine. The XT2 battery fits the XT2, the CLE battery fits the CLE stacker with the S-Ride platform, and the CLJB battery fits the CLJB stacker.

Can I use a different charger for my pallet truck battery?

Only use the charger designed for your battery. The charger in this category is a 2 A charger with an EU plug for the XT2.

How do I know when to replace my pallet truck battery?

If your machine runs for much less time on a charge, or if it lifts and drives more slowly near the end of a shift, the battery is worn out. The correct replacement for each SMITH machine is listed above.