Use-Case – SMITH Electric Pallet Jack With Scale SLL3C

  • Cut pallet weighing time 60%
  • Eliminated floor-scale bottlenecks
  • Reduced freight claim costs 70%
  • Improved dock throughput per shift
  • Payback achieved in under 6 months

The Challenge

A mid-sized third-party logistics (3PL) warehouse near Brno manages approximately 280 pallets per day of mixed outbound shipments. Pallets were moved using standard manual pallet jacks, then lined up at two shared floor scales for weight checks before loading. Each weighing required a separate trip of 20–30 meters and waiting in line.

This process caused repeated slowdowns at the scales. Time studies revealed that each pallet took an extra 3–4 minutes just for weighing, totaling about 3.5 hours per day of unnecessary walking and waiting. When weigh checks were missed or incomplete, weight discrepancies with carriers became common, leading to about €900 per month in extra freight charges and costs for handling disputes.

During busy periods, congestion at the dock also increased the chance of mistakes and required overtime to finish late trucks, without increasing billable output.


The Solution

The warehouse added one SMITH Electric Pallet Jack With Scale SLL3C to each of its two busiest outbound docks. This model was chosen for its 1,500 kg load capacity, built-in scale, and compact size that fits well in tight racking aisles.

Each jack is run at about 60% of its rated workload to ensure consistent performance and battery life throughout the shift. Now, pickers weigh pallets automatically as they move them from the pick area to staging, viewing the weight directly on the jack’s display and entering it into the warehouse management system (WMS).

Key features in use include the integrated scale for on-the-spot weighing, the 24 V / 30 Ah lithium-ion battery for fast charging between picking waves, and the ergonomic handle that allows operators to drive, lift, and weigh without switching equipment.


ROI Calculation

Before – Manual jacks and floor scales:

After – SMITH Electric Pallet Jack With Scale:

Investment:
2 × SMITH Electric Pallet Jack With Scale SLL3C at €1,399 each = €2,798 total hardware cost
Combined monthly savings: €2,800 + €630 ≈ €3,430 per month
Payback period: €2,798 ÷ €3,430 < 1 month. Even after factoring in a conservative utilization rate and maintenance reserve, the warehouse determined a practical payback in under 6 months.


Results

By weighing at the pick location, the 3PL eliminated floor scale delays and freed up the equivalent of more than one full-time operator per shift. Dock congestion dropped, outbound cut-off times became more consistent, and freight weight disputes were greatly reduced.

“The SMITH pallet jacks with built-in scales turned weighing into something our pickers do as they go. We eliminated wasted walking, cleared up dock lines, and carrier weight disputes are now rare.” — Jan Novak, Operations Manager, CentralLog 3PL/Brno, Czech Republic