Use-Case – Pallet Strap Feeder B190

  • Cut under-pallet threading time 60%
  • Reduced bending and kneeling injuries
  • Freed staff for higher-value tasks
  • Payback achieved in under one month
  • Improved safety compliance and ergonomics

The Challenge

A retail distribution center near Graz handles approximately 350 palletized shipments each day, all secured using PP and PET strapping. Workers previously had to bend or kneel to manually thread straps beneath pallets, which was both time-consuming and physically taxing.

The average time to thread straps under a pallet had increased to over one minute per pallet, causing slowdowns at the shipping lanes. Additionally, the facility reported 4–5 minor back and knee injuries annually related to strapping, which raised indirect costs and drew attention from the safety committee.


Manual Process

Prior to adopting the Pallet Strap Feeder B190, staff used a standard “hand push” approach. They would crouch, attempt to push the naturally curved strap under the pallet, and then walk around to pull it through. Straps often caught on boards or lost alignment, requiring the process to be repeated.

Before Automation:

This slow, ergonomically challenging method required one full-time operator during busy periods. Supervisors also estimated about €1,500 per year in indirect expenses from minor musculoskeletal injuries and related absences.


Automated Solution

To boost ergonomics and efficiency without replacing their current manual and battery strapping tools, the facility implemented the Pallet Strap Feeder B190 at all outbound lanes. While still a manual device, it essentially “automates” the under-pallet threading step by guiding the strap with a flexible 1900 mm rod and polyurethane clip, allowing operators to remain upright.

After Installing Pallet Strap Feeder B190:

The B190’s curved head and flexible rod help straps glide smoothly under pallets on the first try. Now, one operator can manage several lanes, and the health and safety team reported a significant decrease in complaints about knee and lower-back discomfort within the first quarter.


ROI Calculation

Investment:
Machine cost: €69
Daily savings: (€144 − €58) = €86 per day
Monthly savings (22 workdays): €86 × 22 = €1,892 per month
Payback period: €69 ÷ €86 per day ≈ 0.8 days (less than 1 workday)

Even with a cautious estimate of just €83 per day in net savings after accounting for change management and occasional low-volume days, the payback is still achieved in well under a week. Additional intangible benefits include lower injury risk, fewer interruptions from rethreading, and a steadier outbound process.


Conclusion

By adding the affordable Pallet Strap Feeder B190 to their strapping stations, the Graz distribution center reduced under-pallet threading time by about 60% and cut daily labor from 5.8 to 2.3 hours. With daily savings in the €80–€90 range, the tool paid for itself within the first week and improved workplace ergonomics.

“With the B190 we reduced under-pallet threading from about 6 hours to just over 2 hours per day and are saving roughly €80 in labor costs every shift. The fact that staff can stay standing has also cut strapping-related complaints almost to zero.” — Sara T., Warehouse Manager, Graz Distribution Center (Austria)