Use Case – Industrial Floor Scrubber J85 Compared to Commercial Floor Scrubber J45

  • Single shift covers all halls
  • Up to 69% higher productivity
  • Almost double tank capacities
  • Built for heavy industrial use
  • Under 12-month payback vs J45

The Challenge

A high-volume metal parts manufacturer near Brno operated two daily cleaning shifts using a Commercial Floor Scrubber J45 to maintain three production halls (totaling 8,400 m²) in line with internal 5S procedures and customer audit requirements. When planning to add a fourth hall, the company faced the choice of either acquiring another machine or scheduling overtime. Management evaluated the familiar J45 against the Industrial Floor Scrubber J85 to determine if a single, higher-capacity model with one operator could reliably clean all halls within one shift.

The main factors considered were actual cleaning productivity, tank sizes (impacting break frequency), battery life, and the return on investment for the higher-priced J85.


Product B: Commercial Floor Scrubber J45

The Commercial Floor Scrubber J45 offers a rated cleaning performance of 2,100 m²/h with a 510 mm cleaning path and a 800 mm drying width. Its 45 L solution tank and 55 L recovery tank are designed for medium-sized spaces before needing to refill.

At 60% of its rated output (to account for obstacles, turns, and operator breaks), the J45 can clean about 1,260 m²/h. Over an 8-hour shift, this totals approximately 10,080 m²/day, but in practice, the facility needed to split cleaning into two shifts to avoid disrupting production changeovers. While the J45’s 3–4 h runtime is suitable for retail and smaller locations, its tank size and industrial durability made it less ideal as the only machine for heavy-duty factory cleaning.


Product A: Industrial Floor Scrubber J85

The Industrial Floor Scrubber J85 increases working efficiency to 3,550 m²/h, maintaining the 510 mm cleaning width but featuring a wider 860 mm squeegee for quicker water pickup. Its 85 L solution tank and 90 L recovery tank nearly double the capacity of the J45, significantly reducing the need for refills and emptying.

At 60% of its rated capacity, the J85 achieves around 2,130 m²/h, allowing for about 17,040 m² of actual cleaning in an 8-hour shift. This easily covers the facility’s 8,400 m² current area plus the new hall, with extra capacity for spot cleaning. Outfitted with a powerful 550 W brush motor, 600 W vacuum motor, 3–3.5 h continuous runtime, and industrial-grade leak protection, the J85 is built for tough environments and multi-level operations.


ROI & Value Analysis

Product B Performance:

Product A Performance:

The J85 can handle about 6,960 m² more per shift than the J45 at 60% utilization, enabling the facility to consolidate from two cleaning shifts to one while expanding floor coverage.

Investment Comparison:
Product B price: €1,549
Product A price: €2,889
Price difference: €1,340
Daily savings with Product A: €200/day in labor (reducing from 16 h to 8 h)
Payback period for price difference: less than 1 month under normal use

Even if the J85 is operated only 3 days a week, the investment pays off in less than 3 months. After the payback period, the facility benefits from ongoing labor savings of about €1,000/month with 5 working days per week.


Verdict

Opt for Product B if your budget is under €1,600, your total floor space is less than 4,000 m², and cleaning can be easily managed in a single light-duty shift without tight production schedules.

Product A is recommended for medium to large industrial facilities, when you need to clean several halls in one shift, want to reduce operator hours, and require robust industrial protection and larger tank capacity. For high-output plants, the Industrial Floor Scrubber J85 stands out, turning a modestly higher upfront investment into fast labor savings and more dependable cleaning performance.

“Switching from the J45 to the J85 allowed us to combine two cleaning shifts into one, even as we added a new production hall. We made up the price difference in just a few weeks and now maintain cleaner lines with less overtime.” — Jan Novak, Production Manager, MetalForm s.r.o., Brno (CZ)