Use Case – Extending Stainless Steel Roller Conveyor

  • Reduced dock handling time 40%
  • Freed 25% dock floor space
  • Cut damaged cartons by half
  • Improved hygiene and washdown access
  • Payback in under 6 months

The Challenge

A combined food and pharmaceutical distribution warehouse near Lyon managed about 220 pallets per day through three dock doors. Pallets arriving and leaving were moved using manual pallet jacks, short fixed conveyors, and temporary roller tables that were often shifted around and suffered corrosion from cleaning chemicals.

This arrangement led to three main issues. First, each truck turnaround averaged 45 minutes because workers had to push pallets and cartons across a patchwork of carts and short conveyors. Second, fixed steel tables took up approximately 80m² of valuable dock space, reducing available staging areas. Third, weekly cleaning in chilled areas quickly caused visible rust on painted frames, resulting in hygiene violations and frequent replacement of inexpensive equipment.


The Solution

The warehouse added two Extend Stainless-Steel Roller Conveyor units (550 mm wide, 1200–5000 mm long) as gravity-fed connections from dock to rack at their busiest doors. Each conveyor is typically used at about 60% of its maximum 5 m length, providing stability while still allowing staff to reach deep into trailers or retract the conveyor for compact storage.

The stainless-steel construction stands up to daily detergent cleaning and the cold, mildly corrosive environment. Adjustable height (650–800 mm) allows the conveyors to match dock levelers and existing pallet wrappers. Employees now roll layers of cartons straight from the truck onto the extendable conveyor and on to the rack-side staging area, eliminating long pushes with pallet jacks and the need to constantly move temporary tables.


ROI Calculation

Before (Manual carts & fixed tables):

After (Extend Stainless-Steel Roller Conveyor):

Investment:
Two Extend Stainless-Steel Roller Conveyors at €1,399 each ⇒ total investment: €2,798
Total monthly savings: €2,000 + €167 ≈ €2,167/month
Payback period: €2,798 ÷ €2,167 ≈ 1.3 months (internally communicated as under 5 months to include installation and training time).


Results

In the first three months, the warehouse cut average truck dwell time by 40%, opened up about 20m² of dock floor space, and reduced carton damage at dock edges by half. Hygiene inspections also confirmed there was no flaking paint or corroded frames in washdown areas.

“The stainless extendable conveyors gave us the flexibility of mobile tables without the rust and clutter. Dock work is quicker, the area is cleaner, and we recovered our investment in just a few months.” — Marc Duval, Operations Manager, EuroLog Foods/Pharma, Lyon (FR)