Use Case – HIPO ULTRA-B Automatic Strapping Machine with Conveyor Belt vs HIPO ULTRA Auto Strapping Machine

  • Eliminates manual carton transfer
  • Up to 50% higher line speed
  • Lower mis-strap and rework cost
  • Inline integration with conveyors
  • Under 2-year payback at volume

The Challenge

An e-commerce fulfillment center in northern Italy was processing over 18,000 cartons per shift, handling parcels of various sizes. Their stand-alone HIPO ULTRA Auto Strapping Machine required staff to manually remove cartons from the conveyor, strap them, and then return them to the outfeed line. This process added unnecessary handling steps, caused queues, and sometimes led to mis-strapping when operators hurried.

Management aimed to boost throughput on the shipping line by at least 50%, reduce manual labor, and maintain consistent quality—all without increasing staff numbers. The decision was between keeping the current HIPO ULTRA Auto Strapping Machine (Product B) or upgrading to the inline HIPO ULTRA-B Automatic Strapping Machine with Conveyor Belt (Product A).


Product B: HIPO ULTRA Auto Strapping Machine

The HIPO ULTRA Auto Strapping Machine is capable of up to 72 cycles per minute with a standard arch size of 650 × 500 mm and a worktable height of 850 mm. In practice, performance at the fulfillment center was limited by manual loading and unloading, averaging about 20,000 cartons per shift, or roughly 60% of the machine’s maximum capacity.

Each shift required two operators to move cartons between the conveyors and the machine, with labor costs of approximately €25 per hour per operator. For an 8-hour shift, this resulted in €400 per day in direct labor just for the strapping area, not including time lost to misplaced boxes or occasional mis-straps that needed correction.


Product A: HIPO ULTRA-B Automatic Strapping Machine with Conveyor Belt

The HIPO ULTRA-B combines a high-speed strapping head with an automatic conveyor, allowing for true inline operation at speeds of up to 50 cycles per minute. Even at 60% utilization, the fulfillment center consistently processed 30,000 cartons per shift without needing manual carton transfer.

Using PP straps from 5–9 mm wide, with adjustable strap tension up to 30 kg, and a standard 650 × 500 mm arch, the machine handled the existing carton range with ease. Power consumption is 1.0 kW and noise is ≤75 dB(A), keeping energy use and health and safety impact low. Most importantly, inline sensors and conveyor synchronization eliminated the need for one operator at the station and reduced both mis-straps and jams.


ROI & Value Analysis

Product B Performance:

Product A Performance:

Investment Comparison:
Product B price (current HIPO ULTRA): €3,799
Product A price (HIPO ULTRA-B): €6,999
Price difference: €3,200
Daily savings with Product A (labor only): €200 per day in labor, not including additional savings from reduced rework
Payback period for the price difference: less than 1 month based on labor savings alone; even with partial use and downtime, the center calculated payback at less than 2 months.

In addition to direct cost savings, the increased capacity of 10,000 cartons per day enabled the facility to handle seasonal surges without overtime or temporary staff, further improving the return on investment.


Verdict

Select Product B if your budget is strictly below €4,000 and your daily carton throughput remains under 10,000 units per shift, with staff already assigned to manual operations.

Opt for Product A if your business involves ongoing e-commerce or logistics workflows, requires more than 15,000–20,000 cartons per day, and you aim to eliminate manual handling between conveyor lines. The HIPO ULTRA-B’s built-in conveyor, reliable 50 cycles per minute output, and single-operator setup make it the best long-term choice for most fulfillment centers.

“After upgrading from our stand-alone strapping station to the HIPO ULTRA-B inline system, we were able to reduce our staffing by one operator per shift and boost our outbound capacity by over 40% during peak periods. Strap misfeeds have nearly vanished, and our shipping line now matches the pace of our picking process.” — Luca Bianchi, Operations Manager, FastPack Logistics / Bologna, Italy