Use Case – ST-210S-H1 Inkjet Thermal Printer vs GT-100E Handheld Thermal Inkjet Printer

  • Unattended inline high-speed printing
  • Up to 600 DPI code clarity
  • Cuts rework and scrap by half
  • Frees operator from manual coding
  • Fast payback on price difference

The Challenge

A mid-sized producer of food and cosmetics in northern Italy was marking batch numbers and expiration dates using the GT-100E Handheld Thermal Inkjet Printer. As production speeds increased and the variety of products expanded, operators found it difficult to keep pace, walking along the conveyor with the handheld printer and halting the line to correct misprints. Management faced a decision point: when to upgrade from a handheld device to a fixed inline printer, weighing the pros and cons of manual handheld printing versus a dedicated inline solution.

Key factors in the decision included print quality at full conveyor speed, operator efficiency, the rate of rework caused by misprints, and the total cost per coded package.


Product B: GT-100E Handheld Thermal Inkjet Printer

The GT-100E Handheld Thermal Inkjet Printer provides flexible TIJ 2.5 coding, offering up to 300 DPI vertical resolution and print heights ranging from 1 to 12.7 mm. While it is technically capable of keeping up with conveyor speeds up to 406 m/min, in real-world use the customer operated it by hand at about 60 m/min to ensure codes were clear and properly aligned.

At 60% of the practical handheld throughput, a single operator marked approximately 14,600 packs per day during an 8-hour shift, factoring in walking time and occasional stops to fix misprints. Labor requirements included one full-time operator at €25 per hour plus 20% of another operator’s time for changeovers and rework, totaling about €200 per day in labor costs directly related to coding.

Misprints and blurred codes resulted in an estimated 2% rework or scrap rate, leading to extra downtime and wasted packaging. Although the GT-100E is an affordable purchase at around €699, the handheld process became a limiting factor as production volumes increased.


Product A: ST-210S-H1 Inkjet Thermal Printer

The ST-210S-H1 Inkjet Thermal Printer is a fixed-mount TIJ 2.5 system engineered for continuous inline operation. It produces up to 600 x 600 DPI resolution with a 12.7 mm print height and maintains reliable printing at speeds up to 406 m/min at 90 DPI, or 60 m/min at 600 DPI, matching the customer’s conveyor speed at maximum quality.

Installed directly above the conveyor and activated by sensors, the ST-210S-H1 operated at 60% of its inline capacity, marking about 19,500 packs per day on the same 8-hour shift, without requiring an operator to walk the line. One operator could now oversee three lines using the 7-inch industrial touch screen and built-in Linux interface, reducing labor costs for coding to roughly €75 per day.

Consistent 600 DPI codes on cartons and plastic films reduced misprints and unreadable codes by more than 50%, lowering the rework or scrap rate from 2% to about 0.8%. The printer’s compatibility with water-based, solvent, UV, invisible, and food-grade inks also made it easier to meet compliance requirements across different product types.


ROI & Value Analysis

Product B Performance:

Product A Performance:

Assuming a conservative packed product value of €0.20 per pack, lowering scrap saves approximately 135 packs/day × €0.20 ≈ €27/day. Labor cost reduction is €125/day (€200 minus €75).
Total daily savings with Product A: approximately €152/day.

Investment Comparison:
Product B cost: €699
Product A cost: €1,299
Difference in price: €600
Daily savings with Product A: €152/day
Payback period for the price difference: less than 1 month (about 4 working days)

After the payback period, Product A handles roughly 4,900 more packs/day, offering extra capacity for future growth without needing additional staff.


Verdict

Product B is the right choice if your budget is strictly below €1,000, your daily volume remains under 10,000 packs/day, and you require maximum portability for occasional or off-line coding tasks.

Product A is ideal if you operate a continuous conveyor, want 600 DPI codes at full production speed, need to minimize rework and scrap, and plan to reduce operator labor on the line. For most mid-volume manufacturers, the ST-210S-H1 Inkjet Thermal Printer stands out as the best long-term investment, with a payback on the price difference in well under a month and clear improvements in consistency, throughput, and labor savings.

“After switching from the handheld GT-100E to the inline ST-210S-H1, we achieved stable 600 DPI codes at full speed and cut our rework rate by half. Our operators no longer have to follow the line with a handheld printer, and the extra €600 was recovered in less than two weeks.” — Luca Bianchi, Production Manager, Alpi Foods, Parma (Italy)