Use Case – Heat Shrink Machine F7060

  • Cut per-pack time by 60%
  • Freed one full operator
  • Reduced rework and damage
  • Standardized retail-ready packaging
  • Payback in under 7 months

The Challenge

A mid-volume e-commerce fulfillment center near Graz was manually wrapping online orders in shrink film and finishing them with heat guns. Handling about 800 parcels each day, two packers spent most of their shifts on repetitive wrapping tasks instead of focusing on quality checks or other value-added activities.

This manual approach required approximately 48 seconds per parcel and resulted in inconsistent packaging. Film waste was significant, and about 5% of packs needed to be reworked due to poor shrink results. Overtime costs increased during busy periods. Management was looking for a compact automated solution to standardize quality and free up at least one operator.


Manual Process

Operators would pre-cut shrink film from rolls, wrap each parcel by hand, and then use handheld heat guns to shrink the film. The time needed for each cycle depended on the operator’s skill and the size of the product.

Before Automation:

This process required the equivalent of 1.3 full-time employees dedicated to shrink wrapping, and often two people were assigned during peak times to prevent delays in shipping.


Automated Solution

The company implemented the Heat Shrink Machine F7060, which combines sealing and shrinking in a single compact unit. It was installed in-line with the order picking process so that one operator could keep products moving through the machine continuously.

After Installing Heat Shrink Machine F7060:

The F7060 now handles all shrink-wrapped SKUs with one part-time operator at the station. The rest of the original staff’s time is now used for custom packing and quality assurance.


ROI Calculation

Investment:
Machine cost: €2,199
Daily labor savings: Before €267/day − After €108/day ≈ €159/day (rounded to €160/day)
Monthly savings (22 working days): €160/day × 22 days = €3,520 per month
Payback period: €2,199 ÷ €160/day ≈ 13.7 days (less than 1 month)

Even when allowing for a cautious ramp-up, training, and occasional downtime, and assuming only €350 per month net savings for ROI, the payback is still:
€2,199 ÷ €350/month ≈ 6.3 months (less than 7 months)


Conclusion

By moving from manual hand-wrapping and heat guns to the Heat Shrink Machine F7060, the e-commerce center reduced per-pack time by about 60% and cut daily labor from 10.7 hours to 4.0 hours. Consistent shrink quality lowered rework from 5% to 1%, while freeing up one full operator for higher-value responsibilities.

“The F7060 allowed us to reassign the equivalent of one full-time packer and reduced our shrink wrapping time from 10.7 hours to about 4 hours per day. With daily labor savings of roughly €160 and rework dropping from 5% to 1%, we earned back our investment in well under 7 months and achieved much more reliable packaging quality.” — Markus Leitner, Operations Manager, Styriapack E-commerce/Graz